Basic Surveying Syllabus Unit & Topic Wise for Civil Engineering 2nd Sem

byMSBTE All Clear •
2

The Basic Surveying syllabus for Civil Engineering (CE), under the I-scheme of MSBTE, has been gathered from the MSBTE official website for the convenience of diploma students. The syllabus includes the subject code, name, number of lectures, tutorials, practical/drawing sessions, credits, and marks distribution for theory, practical, and total marks. For further information, kindly refer to the full semester subjects post on the MSBTE website.

Additionally, you can find the syllabus for all other subjects in the 2nd semester of the Diploma in Civil Engineering (CE) program under the I-scheme of MSBTE by visiting the Diploma in Civil Engineering (CE) Syllabus for the 2nd Semester I-Scheme MSBTE Subjects. The following is a comprehensive syllabus for Basic Surveying.


{tocify} $title={Table of Contents}

22205 [ASU] Basic Surveying Civil Engineering Unit & Topic Wise Syllabus with Marks

Note - Swipe left for all details.

Sr.No. Chapters/Unit Name Weightage
Unit 1 [Overview and Classification od Survey]
Topics and Sub-topics:-

1. Survey- Purpose and Use, Principles of Survey
2. Types of surveying- Primary and Secondary classification. PIlane,
Geodetic, Cadastral, Hydrographic.Photogrammetry Aerial. Layout survey.
Control survey, Topographical survey. Route survey. Reconnaissance survey
3. Scales: Engineer's scale, RF and Diagonal scale
 NA Marks
Unit 2 [Chaim and cross staff survey]
Topics and Sub-topics:-

1. Chain survey Instruments: Metric Chain, Tapes, Arrow, Ranging rod. Open cross
staff. Optical square (No questions to be asked for exams)
2. Chain survey Station, Base line. Check line, Tie line, Offset, Tie station,
obstacles in chaining; Types of offsets: Perpendicular and Oblique
3. Ranging: Direct and Indirect Ranging (No questions to be asked for exams)
4. Errors in length: Instrumental error, personal error, error due to natural cause,
random error
5. Principle of triangulat
6. Location Sketch of survey station and running measurements of building.
7. Conventional Signs, Recording of measurements in a field book
8. Area Calculations (Numerical problems)
 NA Marks
Unit 3 [Chain and Compass traverse]
Topics and Sub-topics:-

1. Compass Traversing: open, closed
2. Technical Terms: Geographic/True Magnetic and Arbitrary Meridians and
Bearings, Meridian and Bearing, Whole Circle Bearing System (Azimuth) and
Reduced (Quadrantal) Bearing System and examples on conversion of given
bearing to another bearing (from one form to another). Fore Bearing and Back
Bearing, Calculation of internal and external angles from bearings at a
station. Dip of Magnetic needle, Magnetic Declination.(Numerical problems)
3. Components of Prismatic Compass and their Functions(No sketch Method of
using Prismatic Compass- Temporary adjustments and observing bearings
4. Local attraction, Methods of correction of observed bearings-Correction at
station and correction to included angles,
5. Methods of plotting a traverse and closing error. Graphical adjustment of
closing error
 NA Marks
Unit 4 [Levelling]
Topics and Sub-topics:-

1. Terminologies: Level surfaces, level line, Horizontal and vertical surfaces, Datum,
Bench Marks- GTS, Permanent, Arbitrary and Temporary, Reduced Level, Rise, Fall,
Line of collimation, Station, Back sight. Fore sight, intermediate sight. Change
point. Height of instruments
2. Types of levels: Dumpy, Tilting, Auto level, Digital level, Components of
Dumpy Level and its fundamental axes Temporary adjustments of Level
3. Types of Leveling Staffs: Self-reading staff and Target staff.
4. Reduction of level by Line of collimation method and Rise/ Fall Method
5. Methods: To find the R. L. by H 1 method(Numerical problems)
6. To find R.L by Rise and Fall method with necessary checks. (Numerical problems)
7. Leveling Types: Simple. Differential, Fly, Profile and Reciprocal Leveling
8. Computation of missing readings, Errors in Leveling. (Numerical problems)
9. Comparison of different levels.
 NA Marks
Unit 5 [Contouring]
Topics and Sub-topics:-

1. Contour, contour interval, horizontal equivalent.
2. Contour maps: Characteristics and uses
3. Methods of Contouring: Direct and indirect
4. Methods of interpolation of contours:
approximate, arithmetic and graphical
5. Toposheets: Study examples.
 NA Marks
Unit 6 [Measurement of Area and Volume]
Topics and Sub-topics:-

1. Digital planimeter: Components and Uses
2. Measurement of area using digtal
planimeter (No problems to be asked for Exams)
3. Measurement of volume of reservoir from contour map
(No problems to be asked for exams)
 NA Marks
Join MSBTE Wallah Civil Groups
Whatsapp Group
(Diploma)
Telegram Group
(Diploma)

surveying,basic surveying syllabus overview,syllabus for surveying,sbte bihsr surveying,2nd sem civil engg new syllabus,surveying in civil engineering,basic civil engineering surveying,surveying syllabus,chain surveying,surveying basics,basic surveying,basic of quantity surveying,what is surveying in civil engineering,bihar polytechnic 2nd semester basic survey syllabus,basics of surveying in civil engineering,land surveying basics


2 Comments

Previous Post Next Post